Tips And Tricks

How to Create Folder "CON"

Ever tried to create a folder "CON" or "AUX" or "NUL".

Tried now???  - not working :)

Here you go, a simple method to  stop your anxiety

Rename folder from the right click option........
Now press alt and press 255...
press 255 frm the right side of the key bords i.e, Num pad.
where only numbers are given.....
now write con and then press enter.....yayyy!!
you ll see a con folder in ur pc
and also you can delete it easily.

All (Ctrl+Alt+Del) Permanently deleted files Recovery solution

Sometimes we delete the files permanently, and realize that deleting them is like a Blunder...

For all those folks,

Here is the solution

Software called "Kissass Undelete" , can bring those files from the hard disk or your flash drive.

Conditions : Only if the data on that drive is not re-occupied(or written). that means the space which was available after the deletion is not been occupied after the deletion.

Click Here to download the .

1)

To start searching for the files,

Select the drive from the Left panel of the Windows and Click the scan button.

the Scan might take upto 10 secs.

2)

When the files search has been completed, it will show you the results with the name, typ, size and the last modified date of the searched file.

3) Now you can select the file to be recover. This is an Open source application and available for All Windows OS(Windows XP/Vista/ 7).

How to "Delete administrator Password" without any software

Method 1

Boot up with DOS and delete the sam.exe and sam.log files from Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.

Method 2

Step 1. Put your hard disk of your computer in any other pc .Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ).Step 3. Then open that drive in which the victim’s window(or your window) is installed.Step 4. Go to location windows->system32->configStep 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer :-)

Add Your Name (or) Application to right click Of My Computer

Caution ..
As it is related to Windows regisrty it can be dangerous
so,Try This at ur own risk


To write your name on right click application
please follow the steps.
1.Copy/Paste the following code in Notepad And then Save it as .reg

Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]
@="Your Name Or Name of the Application"
[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]
@="Location Of The Application"

2.Now edit it and then Type your name In

Eg:

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor]
@="Rajesh"

3. If u want to get any application, once you click Your name or name of application
Then , Type the location Of the application Which u want to open In:

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Registry Editor\command]
@="Location Of The Application"

For eg.C:\Program Files\Yahoo!\Messenger\messenger.exe
Thats It finally save it And then Run it .

------------------------------------------------------------
To add Application Control Panel

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Control Panel\command]
@="rundll32.exe shell32.dll,Control_RunDLL"

To add Application Add/Remove

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\Add/Remove\command]
@="control appwiz.cpl"

To add Application Reboot

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Reboot]\command]
@="shutdown -r -f -t 5"

To add Application Shutdown

[HKEY_CLASSES_ROOT\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\[Shutdown]\command]
@="shutdown -s -f -t 5"

-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-....-......----..--.-...--.-..-

Tips to recover scratched CD's

1. Spread a cloth on a flat surface and place the CD on it.
2. Then, hold the disc with one hand, use the other to wipe the polish into the affected area with a soft cloth.
3. Wait for it to dry and buff using short, brisk strokes along the scratch, not across it.
4. A cloth sold to wipe spectacles or camera lenses will work super m8's.
5. When you can no longersee the scratch,, wash the disc with water and let it dry before playing. Intersting isnt it? Try it right now
I have used toothpaste with good effects before Ive also used car paint cutting compound on deeper scratches. It does leave lots of smaller scratches (as it is a cutting compound after all) but it will remove the worst scratches in most cases.
ya u r gng to b surely befinited by this Operation

* Fingermarks/prints cause 43% of disc problems!
* General wear & tear causes 25% of disc problems!
* Player-related issues cause 15% of disc problems!
* Remaining Others

Saturday, July 26, 2008

Does When u Double click on Drive... New Window opens?

Whenever ppl double-click on any folder in Computer,
it opens in a new window even if selected the option “Always open folders in same window” in “Tools -> Folder Options”.
For this kind of Problem
Download following zip file, extract it and then run .REG file and confirm the action:
Download

Updated trick for enabling Folder option

Many times Windows users face a common problem. The “Folder Options” in “Tools” menu is not visible. Even It can’t be accessed from Control Panel. Also “Registry Editor” is disabled.
Follow the simple steps mentioned in this tutorial and your problem will be solved:

1. If Folder Options is disabled but Registry Editor is still working in your system, then you can enable Folder Options by editing Windows Registry.
Type regedit in RUN dialog box and press Enter.
it’ll open Registry Editor, now go to following keys:
HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Policies\ExplorerHKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Current Version\Policies\Explorer
In right-side pane, check whether a DWORD value named NoFolderOptions exists or not? If it exists, delete it.

2. If you are not familiar with editing the registry, then you can simply download following file, extract it and then run the .REG file:
Folder_option.zip

................................................................................................................
If u cant run regedit ....
Seems like your system is infected with a virus. Pls follow following link:
http://www.askvg.com/is-your-system-infected-with-a-virus-spyware-adware-trojan/

..................................................................................................................
Some ppl find that "show hidden files and folders" option ll not b enabled..
though enabled they cant c the hidden folders...
for that dont worry
--open RUN
--type regedit
--HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\Advanced
And in right-side pane, change value of “Hidden” to 1 and refresh My Computer window and you’ll be able to see hidden files again

Read More

Mobilink Jazz Call Forwarding

Call Forwarding allows you to divert incoming calls to your Voice Mail or another MOBILINK GSM number, when your mobile is busy, unreachable or you don’t want to be disturbed.
These basic but essential services are provided to all MOBILINK GSM customers free of charge, and are automatically activated with your connection (except for Call Forwarding on which nominal call charges apply as per package plan).

Downloads

Download On-call services Brochure in Urdu

Download On-call services Brochure in English.

Read More

Viber for windows free download

Viber for Windows may be a fresh VoIP communication consumer that permits everybody to be connected with their friends, family and associates from all round the world. With the computer programme and various options designed from the bottom up to be usable on any form of trendy OS platform and device from issue (ranging from your honest Windows computer to all or any sorts of transportable smartphones and tablets), you’ll forever take care that your Viber friends are going to be out there for chat.

Viber for Windows is presently employed by over one hundred seventy five million users from all round the world, and that they all fancy victimization distinctive options that you just cannot realize on

the other communication protocols, most notably improbably crisp HD voice calls visuals, ability to use chat while not ever registering or receiving hard-to-get invite, and most fascinating, transferring current calls between your devices.

Viber Features:

• Best-quality HD voice calls
• Video calls
• Free text and ikon messages
• Group conversations
• No registration, passwords or invites needed
• Contacts and messages synchronize between your mobile and Windows
• Transfer current calls between devices
• No registration, passwords or invites needed

Read More

How to Hack Someones IP Address 2014

An ultimate hack which enable u to trace any one any where in the world


Most of you may be curious to know how to find the IP address of your friend’s computer or to find the IP address of the person with whom you are chatting in Yahoo messenger or Gtalk. Finding out someone's IP address is like finding their phone number, an IP address can be used to find the general location where that person lives. Now while most of the tutorials on the net teach you how to steal an ip address via MSN, or any other chat software, in this post I’ll show you how to find IP address of someones computer using script. Using this method for hacking someones ip adress is very easy and effectively, so just follow the steps bellow.

NOTE: This tutorial is for educational purposes only, I am NOT responsible in any way for how this information is used, use it at your own risk.

How to Hack Someones IP Address?


Alright, I'm gonna give you this script, that you write in the index.php. It will redirect them tohttp://www.google.com/, but you can change that in the script.


Here is the sript:

Code:



$file = 'IPz.txt';
$handle = fopen($file,'a');
if(!isset($_GET['p'])) { header('Location: http://google.com'); }
fwrite($handle, $_GET['p'].': '.$_SERVER['REMOTE_ADDR'].'\r\n');
fclose($handle)
?>

1. First of all you need to make a new .txt document on the website you're uploading this to. Call it IPz.txt (You can change that in the script aswell where it says $file = 'IPz.txt'; in the second line. Then change the CHMOD to 777.

2. Now you need to past the script above in to a .php document, and upload it.


3. Now you make people visit your site, and they will get redirected to Google.

4. To view the IP, you simply add "/IPz.txt" after your domain, and you'll see the IP.



This is a very simple, but effectually method for stealing someones IP Address.

Hope you'll find this tutorial useful. Happy Hacking :)

Introduction
1. Welcome to the basic NETBIOS document created by aCId_rAIn. This document
will teach you some simple things about NETBIOS, what it does, how to use it, how to
hack with it, and some other simple DOS commands that will be useful to you in the
future.
1. Hardware and Firmware
1a. The BIOS
The BIOS, short for Basic Input/Output Services, is the control program of the PC.
It is responsible for starting up your computer, transferring control of the system to
your operating system, and for handling other low-level functions, such as disk access.
NOTE that the BIOS is not a software program, insofar as it is not purged from
memory when you turn off the computer. It's
firmware, which is basically software on a chip.
A convenient little feature that most BIOS manufacturers include is a startup
password. This prevents access to the system until you enter the correct password.
If you can get access to the system after the password has been entered, then there
are numerous software-based BIOS password extractors available from your local
H/P/A/V site.
NETBIOS/NBTSTAT - What does it do?
2. NETBIOS, also known as NBTSTAT is a program run on the Windows system and is
used for identifying a remote network or computer for file sharing enabled. We can
expoit systems using this method. It may be old but on home pc's sometimes it still
works great. You can use it on your friend at home or something. I don't care what
you do, but remember, that you are reading this document because you want to learn.
So I am going to teach you. Ok. So, you ask, "How do i get to NBTSTAT?" Well, there
are two ways, but one's faster.
Method 1:Start>Programs>MSDOS PROMPT>Type NBTSTAT
Method 2:Start>Run>Type Command>Type NBTSTAT
(Note: Please, help your poor soul if that isn't like feeding you with a baby spoon.)
Ok! Now since you're in the DOS command under NBTSTAT, you're probably
wondering what all that crap is that's on your screen. These are the commands you
may use. Your screen should look like the following:
NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n]
[-r] [-R] [-RR] [-s] [-S] [interval] ]
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
-c (cache) Lists NBT's cache of remote [machine] names and their IP addresses
-n (names) Lists local NetBIOS names.
-r (resolved) Lists names resolved by broadcast and via WINS
-R (Reload) Purges and reloads the remote cache name table
-S (Sessions) Lists sessions table with the destination IP addresses
-s (sessions) Lists sessions table converting destination IP addresses to computer
NETBIOS names.
-RR (ReleaseRefresh) Sends Name Release packets to WINS and then, starts
Refresh
RemoteName Remote host machine name.
IP address Dotted decimal representation of the IP address.
interval Redisplays selected statistics, pausing interval seconds between each display.
Press Ctrl+C to stop redisplaying
statistics.
C:\WINDOWS\DESKTOP>
The only two commands that are going to be used and here they are:
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
                                                  Host Names
3. Now, the -a means that you will type in the HOST NAME of the person's computer
that you are trying to access. Just in case you don't have any idea what a Host Name
looks like here's an example.
123-fgh-ppp.internet.com
there are many variations of these adresses. For each different address you see
there is a new ISP assigned to that computer. look at the difference.
abc-123.internet.com
ghj-789.newnet.com
these are differnet host names as you can see, and, by identifying the last couple
words you will be able to tell that these are two computers on two different ISPs.
Now, here are two host names on the same ISP but a different located server.
123-fgh-ppp.internet.com
567-cde-ppp.internet.com                                                    IP Addresses
 

4. You can resolce these host names if you want to the IP address (Internet Protocol)
IP addresses range in different numbers. An IP looks like this:
201.123.101.123
Most times you can tell if a computer is running on a cable connection because of the
IP address's numbers. On faster connections, usually the first two numbers are low.
here's a cable connection IP.
24.18.18.10
on dialup connections IP's are higher, like this:
208.148.255.255
notice the 208 is higher than the 24 which is the cable connection.
REMEMBER THOUGH, NOT ALL IP ADDRESSES WILL BE LIKE THIS.
Some companies make IP addresses like this to fool the hacker into believing it's a
dialup, as a hacker would expect something big, like a T3 or an OC-18. Anyway This
gives you an idea on IP addresses which you will be using on the nbtstat command.
                           Getting The IP Through DC (Direct Connection)
5. First. You're going to need to find his IP or host name. Either will work. If you are
on mIRC You can get it by typing /whois (nick) ...where (nick) is the persons nickname
without parenthesis. you will either get a host name or an IP. copy it down. If you do
not get it or you are not using mIRC then you must direct connect to their computer
or you may use a sniffer to figure out his IP or host name. It's actually better to do
it without the sniffer because most sniffers do not work now-a-days. So you want to
establish a direct connection to their computer. OK, what is a direct connection?
When you are:
Sending a file to their computer you are directly connected.
AOL INSTANT MESSENGER allows a Direct Connection to the user if accepted.
ICQ when sending a file or a chat request acception allows a direct connection.
Any time you are sending a file. You are directly connected. (Assuming you know the
user is not using a proxy server.)
Voice Chatting on Yahoo establishes a direct connection.
If you have none of these programs, either i suggest you get one, get a sniffer, or
read this next statement.
If you have any way of sending thema link to your site that enables site traffic
statistics, and you can log in, send a link to your site, then check the stats and get
the IP of the last visitor. It's a simple and easy method i use. It even fool some
smarter hackers, because it catches them off guard. Anyway, once you are directly
connected use either of the two methods i showed you earlier and get into DOS. Type
NETSTAT -n. NETSTAT is a program that's name is short for NET STATISTICS. It
will show you all computers connected to yours. (This is also helpful if you think you
are being hacked by a trojan horse and is on a port that you know such as Sub Seven:
27374.) Your screen should look like this showing the connections to your computer:
------------------------------------------------------------------------------------------------
C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED
TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT
TCP 172.255.255.82:1413 205.188.8.7:26778 ESTABLISHED
TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED
C:\WINDOWS\DESKTOP>
------------------------------------------------------------------------------------------------
The first line indicated the Protocol (language) that is being used by the two
computers.
TCP (Transfer Control Protocol) is being used in this and is most widely used.
Local address shows your IP address, or the IP address of the system you on.
Foreign address shows the address of the computer connected to yours.
State tells you what kind of connection is being made ESTABLISHED - means it will
stay connected to you as long as you are on the program or as long as the computer is
allowing or is needing the other computers connection to it. CLOSE_WAIT means the
connection closes at times and waits until it is needed or you resume connection to be
made again. One that isn't on the list is TIME_WAIT which means it is timed. Most
Ads that run on AOL are using TIME_WAIT states.
the way you know the person is directly connected to your computer is because of
this:
------------------------------------------------------------------------------------------------
C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED
TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT
TCP 172.255.255.82:1413 abc-123-ppp.webnet.com ESTABLISHED
TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED
C:\WINDOWS\DESKTOP>
------------------------------------------------------------------------------------------------

Notice the host name is included in the fourth line instead of the IP address on all.
This is almost ALWAYS, the other computer that is connected to you. So here, now,
you have the host name:
abc-123-ppp.webnet.com
If the host name is not listed and the IP is then it NO PROBLEM because either one
works exactly the same. I am using abc-123-ppp.webnet.com host name as an example.
Ok so now you have the IP and/or host name of the remote system you want to
connect to. Time to hack!
Open up your DOS command. Open up NBTSTAT by typing NBTSTAT. Ok, there's
the crap again. Well, now time to try out what you have leanred from this document
by testing it on the IP and/or host name of the remote system. Here's the only thing
you'll need to know.
IMPORTANT, READ NOW!!!
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
Remember this?
Time to use it.
-a will be the host name
-A will be the IP
How do i know this?
Read the Statements following the -a -A commands. It tells you there what each
command takes.
So have you found which one you have to use?
GOOD!

• Learn C & C++ Programming

 

Time to start.
                                          Using it to your advantage
6. Type this if you have the host name only.
NBTSTAT -a (In here put in hostname without parenthesis)
Type this is you have the IP address only.
NBTSTAT -A (In here put in IP address without parenthesis)
Now, hit enter and wait. Now Either one of two things came up
1. Host not found
2. Something that looks like this:
--------------------------------------------
NetBIOS Local Name Table
Name Type Status
---------------------------------------------
GMVPS01 <00> UNIQUE Registered
WORKGROUP <00> GROUP Registered
GMVPS01 <03> UNIQUE Registered
GMVPS01 <20> UNIQUE Registered
WORKGROUP <1e> GROUP Registered

---------------------------------------------
If the computer responded "Host not found" Then either one of two things are the
case:
1. You screwed up the host name.
2. The host is not hackable.
If number one is the case you're in great luck. If two, This system isn't hackable
using the NBTSTAT command. So try another system.
If you got the table as above to come up, look at it carefully as i describe to you each
part and its purpose.
Name - states the share name of that certain part of the computer
<00>, <03>, <20>, <1e> - Are the Hexidecimal codes giving you the services available on 
that share name.
Type - Is self-explanatory. It's either turned on, or activated by you, or always on.
Status - Simply states that the share name is working and is activated.
Look above and look for the following line:
GMVPS01 <20> UNIQUE Registered
See it?
GOOD! Now this is important so listen up. The Hexidecimanl code of <20> means that 
file sharing is enabled on the share name that is on that line with the hex number. So
that means GMVPS01 has file sharing enabled. So now you want to hack this. Here's
How to do it. (This is the hard part)
                                                  LMHOST File
7. There is a file in all Windows systems called LMHOST.sam. We need to simply add
the IP into the LMHOST file because LMHOST basically acts as a network,
automatically logging you on to it. So go to Start, Find, FIles or Folders. Type in
LMHOST and hit enter. when it comes up open it using a text program such as
wordpad, but make sure you do not leave the checkmark to "always open files with
this extension" on that. Simply go through the LMHOST file until you see the part:
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:
# #INCLUDE
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
## Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmans
erver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.

• Hack SomeOne IP Address

# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
Read this over and over until you understand the way you want your connection to be
set. Here's an example of how to add an IP the way I would do it:
#PRE #DOM:255.102.255.102 #INCLUDE
Pre will preload the connection as soon as you log on to the net. DOM is the domain or
IP address of the host you are connecting to. INCLUDE will automaticall set you to
that file path. In this case as soon as I log on to the net I will get access to
255.102.255.102 on the C:/ drive. The only problem with this is that by doin the
NETSTAT command while you are connected, and get the IP of your machine. That's
why it only works on simple PC machines. Because people in these days are computer
illiterate and have no idea of what these commands can do. They have no idea what
NETSTAT is, so you can use that to your advantage. Most PC systems are kind of
hard to hack using this method now because they are more secure and can tell when
another system is trying to gain access. Also, besure that you (somehow) know
whether they are running a firewall or not because it will block the connection to
their computer. Most home systems aren't running a firewall, and to make it better, they don't know how operate the firewall, therefore, leaving the hole in the system.
To help you out some, it would be a great idea to pick up on some programming
languages to show you how the computer reads information and learn some things on
TCP/IP (Transfer Control Protocol/Internet Protocol) If you want to find out
whether they are running a firewall, simply hop on a Proxy and do a port scan on their
IP. You will notice if they are running a firewall because most ports are closed. Either
way, you still have a better chance of hacking a home system than hacking Microsoft.
                                                       Gaining Access
7. Once you have added this to you LMHOST file. You are basically done. All you need
to do is go to:
Start
Find
Computer
Once you get there you simply type the IP address or the host name of the system.
When it comes up, simply double click it, and boom! There's a GUI for you so you
don't have to use DOS anymore. You can use DOS to do it, but it's more simple and
fun this way, so that's the only way i put it. When you open the system you can edit,
delete, rename, do anything to any file you wish. I would also delete the command file
in C:/ because they may use it if they think someone is in their computer. Or simply
delete the shortcut to it. Then here's when the programming comes in handy. Instead
of using the NBTSTAT method all the time, you can then program you own trojan on
your OWN port number and upload it to the system. Then you will have easier access
and you will also have a better GUI, with more features. DO NOT allow more than one
connection to the system unless they are on a faster connection. If you are
downloading something from their computer and they don't know it and their
connection is being slow, they may check their NETSTAT to see what is connected,
which will show your IP and make them suspicious. Thats it. All there is to it. Now go
out and scan a network or something and find a computer with port 21 or something
open.

Read More